MDU Fender Eliminator LED Strip for Yamaha Bolt

Description

This is a custom LED strip we have made through Radiantz LED. This is the perfect length for use on the rear fender of the Yamaha Bolt. It provides an all-in-one setup having running, brake, and turns all on one strip. 

When purchased with our wiring service and a Fleekz module kit contains:

• Radiantz Z-Flex LED Strip as configured here – wires extended and outfitted to plug into the OEM wiring harness
• Radiantz Fleekz Module for running/brake/turn operation – wires extended and outfitted to plug into the OEM wiring harness
• When purchased with our required wiring service it is completely plug-n-play with OEM plugs to attach to the stock wiring harness. Please be sure to check this option when purchasing.

If you wish to keep your OEM Taillight or signals you will need the appropriate splitters

• Yamaha OEM Taillight Y-Splitter Connector, 3-Wire – to keep your OEM taillight
• Yamaha OEM Turn Signal Y-Splitter Connectors, 3-Wire (PAIR) – to keep your OEM signals

To provide the all-in-one functionality this kit comes with a module that enables these dual color strips to work as running/brake/turns. The entire light will function as a running light and brake light. The outside turn signals will switch off the red and flash the amber full brightness to full off and back to full brightness when the turn signal is activated.

For mounting it is best to use the OEM plastic fender by cutting it down to be just long enough to mount the LED strip onto which will make the LED strip flush with the metal fender. Simply attach the OEM plastic fender if it was removed, measure, mark, and outline the length needed to mount the LED strip. Remove the plastic fender, cut off the excess unneeded part of the fender, smooth it out if needed, remount with the 3M adhesive on the LED strip, and use the plastic fender to conceal/protect any extra wiring.

Due to the amount of customization we make the harnesses for the LED strip connection per order, please allow up to 1 week for us to customize the harness for your chosen setup. The quality is worth it over other cheaper brands. We have had one of these on a bike for over 30k miles with no issues or dead cells.

Radiantz LED makes killer high-quality, long-lasting LED’s in the USA.

We also have 310 Parts Side-Mount Tag Brackets to relocate your plate.