Yamaha Bolt Dress-UP Kit

The cover kit provides all needed washers and bolts to dressUP your generator cover, clutch cover, the right-hand small engine cover, battery cover, and side mounted brake reservoir.

If you can see the bolts on your intake manifold you might want to add this kit. Washers and bolts for 3 bolts on the manifold and the 1 bolt on the intake bracket.

All needed washers to dressUP those header heatshields

Hardware for the pulley cover and top and bottom belt guards.

DressUP the 3 bolts that hold on the sissy bar pad.

Hardware to dressUP the stock exhaust. Just the section after the headers.

Hardware for strut bolts. Front 4 M10 strut bolts are provided along with washers for all 8 bolts. The rear 4 M8 strut bolts are not in this kit since your existing stock hardware should work for this.

Hardware for the tensioners. The tensioner bolts need to be replaced to dressUP properly. We sell these in a separate set because it is required to do them while you are doing an oil change.