Fork Tube Extensions for Yamaha Cruiser Models

Description

Custom machined fork tube extension made from 303 stainless steel. Want to get that bobber look or just change that handling and clearance on the front end then these will get you there. These replace your fork tube cap and are solid steel. No need to get longer springs, typically an easy install without the need to replace your fork oil.

Offered in 2″, 3″, 4″, 6″, and 8.5″.

• 2-3″ is a great compliment to Hagon rear shock absorbers since it puts the bike at near the same height in the front and rear. They also provide more ground clearance for better handling around corners without scraping pegs. You might also consider doing Hagon Progressive Front Fork Springs when doing any fork tube extension.
• At around 4-6″ it is usually suggested to rake the triple to around 5-degrees which we do offer custom triples. Some of our customers have been pretty happy with 4″ extensions without a rake which gives a really nice look.
• 8.5″ is the next available height and it is highly suggested to rake the front to avoid any handling issues. a 7-degree rake fits nicely. This is the max height we can offer since it keeps the forks fully clamped into the lower triple. If the extensions went past the lower triple clamp the possibility of failure at the thread point might be a concern.

See fitment data for specific model compatibility. Consider getting our Yamaha Bolt Kickstand Extension Kit to reduce the mean lean that can come with raising the front and/or rear end of the bike.